Home
| Media Distribution| Over IP|Binary™ 900 Series 4K Media over IP ReceiverOver IP|Engraved Button
Loading...
close
{0} Hour(s)
{0} Day(s)
{0} Week(s)
{0} Month(s)
{0} Year(s)
- By ordering this product with custom specifications you acknowledge that the sale is final and the product may not be returned or exchanged.
- Send us a sample of the wood that you would like the speaker to match. Your order will be placed on hold for up to 14 days as we wait for your wood sample. Samples not received after 14 days will cause your order to be canceled. Please send your physical sample along with a copy of your Triad Order attached to the address listed below. Triad Speakers Triad Speakers
Sales - RUSH - Paint Sample
15835 NE Cameron Blvd.
Portland, OR 97230
Sales - RUSH - Paint Sample
15835 NE Cameron Blvd.
Portland, OR 97230
Add to cart
Description
Specs
Support
Description
Description
Binary™ 900 Series 4K UHD Media over IP Receivers, when joined in a system with MoIP Transmitters and one MoIP Controller create a highly scalable, flexible IP media distribution system delivering visually lossless 4K HDR (HDR 30Hz and HDCP 2.2 compatible) video and all multichannel formats including Dolby Atmos and DTS-X. Operating on a cost-effective gigabit Layer 2 PoE switch, this setup is the fastest and simplest out there.
Binary™ 900 Series 4K Media over IP Receivers
Binary™ 900 Series 4K Media over IP Receivers, when joined in a system with MoIP Transmitters (B-900-MOIP-4K-TX or B-900-MOIP-4K-TX-RAC) and one MoIP Controller create a highly scalable, flexible IP media distribution system delivering visually lossless 4K HDR (HDR 30Hz and HDCP 2.2 compatible) video. Operating on a cost-effective gigabit Layer 2 PoE switch, this setup is the fastest and simplest out there. Additionally, OvrC remote management allows for quick system setup, easy troubleshooting with access to live screenshots of source stream and fast, simple firmware updates. MoIP Receivers also include an integrated video scaler, allowing 4K source content to be simultaneously distributed to both 4K and 1080p displays, plus audio breakout. Lastly, RS-232, IR, and custom drivers for popular control systems provide tremendous flexibility in system design.
Important Note - Next generation Binary MoIP Firmware now available on Support tab. Click here to learn more.
4K HDR
PoE
Up/Down Scaling
HDCP 2.2
Audio Breakout
Visually Lossless 4K Video
MoIP encodes video up to 4K HDR using visually-lossless, variable bit-rate compression technology. The system is HDR and HDCP 2.2 compatible, resulting in an ultra-stable video stream, perfect audio/video sync and ultra-low latency (one frame).
Mixed 4K & 1080p Sources and Displays
Traditional matrix switchers force you to downgrade all source content to the lowest video quality that will work on all displays. Whether your customer is moving to a full, 4K system now or upgrading from 1080p to 4K over time, MoIP provides the custom solution that fits their budget, without compromising quality.
Impressive Video Walls
Group 4, 9, or even 16 displays together to create amazing video walls. Configuration takes only a minute, without the need to program each device. The result is a new “virtual” receiver, so you simply select the desired source, making control integration a breeze.
Limitless Control Options
Switching of inputs (TX) to outputs (RX) is done through IP commands from a control system sent to the MoIP controller. Out of the box, the system supports three methods for controlling sources and displays: IR, RS-232 and CEC. IR or RS-232 commands can be issued via IP and generated at each endpoint. If desired, IR and RS-232 virtual routing can also be configured from any TX to any or all RX(s). Desired methods for issuing commands are selectable via the local UI. Lastly, for more basic installs where display on and standby is all that is needed, MoIP also supports CEC.
Control System Integration
Our engineers have written drivers for the industry’s leading control systems, including Control4, Crestron, ELAN, URC and more – so controlling the system has a familiar feel. Advanced features like IR routing and RS-232 over IP deliver even more flexibility and customization – and we’ve even provided the MoIP controller’s API to create your own drivers if needed.
The Fastest, Simplest Solution
Gone are the days of head-scratching system design, next-level network know-how and confusing configurations. Binary MoIP removes all that complexity, requiring only a Layer 2 PoE switch (210 and 310 Series), so you don’t need a network guru to install it. OvrC-enablement, simple setup and intuitive user-interfaces enable you to go from power-on to picture in 5 minutes or less.
Flexible & Scalable
The Binary MoIP solution allows you to fit, scale, and upgrade the solution to match your client’s specific needs. Need a 6x8 for one job and a 7x13 for another one? No problem. What about adding a video wall? Done. Instead of replacing the entire system, you can simply purchase new transmitters or receivers when adding sources or displays.
Ultra-Reliable HDR
With Binary MoIP, legacy EMI interference and HDCP/EDID issues are eliminated. Each source is encoded, visually lossless, at the highest quality possible (ex. 4K HDR). Then at each display, the signal is decoded from the network and scaled to the desired resolution (ex. 1080p or 4K HDR). Built-in scaling in the RX means that mixed 1080p/4K systems are no longer a problem, plus pass-through of all audio formats like Dolby Atmos and DTS:X are fully supported.
The Power of OvrC
Binary MoIP delivers something no other media product can – award-winning remote management. OvrC quickens initial setup by auto-discovering the controller, plus it provides unparalleled troubleshooting tools like real-time video screenshots.
Specs
Specifications
| B-900-MOIP-4K-RX |
|---|
Each |
Mounting ears, Mounting ear screws, Rubber feet |
Up to 4K HDR@30Hz 4:2:2 | 4K HDR@30Hz 10 bit | 4K UHD@30Hz 4:4:4 8bit |
HDR Content when available 4K HDR@30Hz 10 bit |
Integrated Video Scaler: Yes (4K, 1080p) |
Yes |
Yes |
IN: N/A |
4:4:4 |
8, 10, 12bit |
Audio Sample Rate: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
2CH PCM, LPCM 2.0, LPCM 5.1, LPCM 7.1, Dolby Digital, Dolby True HD, Dolby Digital Plus, DTS, DTS-HD Master Audio, DTS NeoX, Dolby Atmos, DTS:X |
Audio In: NA |
Control Features – Add RS-232 via IP or virtual routing, Modify IR via 2-way routing or IP, Add Standalone App embedded into controller. |
20-60 kHz |
1 x 3.5mm Stereo (blue), 12V |
1 x 3.5mm Stereo (green) |
IR RCVR PWR OFF/ON |
Serial/RS-232 DTE/DCE |
RS-232 over IP |
1 x RJ-45 (EIA-561) |
Over IP |
Required Managed Switch: Layer 2 Managed w/ IMGP Snooping |
150-300 Mbps (Avg) 850 Mbps (Max) |
1 x RJ45 (T568B) LAN + PoE |
1 frame (16ms - 60Hz, 33ms - 30Hz) |
10/100/1000 Mbps |
Assigned by controller |
Supports single switch deployments: Yes |
20-90% RH (no condensation) |
32-104°F |
-4-140°F |
w/o rack ears: 6.7" x 0.83" x 4.72" |
1U |
12VDC 2A (optional accessory) |
7.5 Watts (Max) |
CE, FCC, RoHS |
Sold As |
Included Accessories |
Transmitter Video Resolution |
Receiver Video Resolution |
Video Features |
HDCP Compliance |
HDMI Compliance |
HDMI Connections |
Chroma Subsampling |
Color Depth |
Audio Features |
Supported Audio Formats |
Audio Inputs / Outputs |
Control Features |
IR Signal Frequency |
IR Inputs |
IR Outputs |
DipSwitch 1 Controls |
DipSwitch 2 Controls |
RS232 Control Desc. |
RS-232 Ports |
CEC |
Networking Features |
Bit Rate |
Ethernet Ports |
Latency |
Ethernet Pass Through 10/100Mbps |
IP Address |
System Configuration |
Operating Humidity |
Operating Temperature |
Storage Temperature |
Dimensions (W x H x D) |
Rack Spacing |
Power Consumption |
PoE Consumption |
Certifications |
Support
Manuals and Guides
Sales Resources
Binary B-960-MOIP Data Sheet
OvrC Cut Sheet
Support Documents
MoIP Comparison Chart
Understanding Media Distribution
Binary SKU Legend
Binary Tech Note: AppleTV HDR 10 Compatibility
Binary Tech Note: Roku® Firmware Compatibility Issue
Control Protocols and Drivers
Binary MoIP RTI Driver Tech Bulletin
Only Available in APEX
Binary B-900-MoIP System C4 Setup
Binary MoIP Crestron Driver
Binary MoIP Elan Driver
Tech Note: Binary MoIP URC Driver
ONLY AVAILABLE IN ACCELERATOR
Binary MoIP API Controller
2-Year Limited Warranty
This Binary™ product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
